Material Safety Data Sheet

Grasspave² Grass Reinforcement System

25 January 1999 Effective Date

Invisible Structures, Inc.
1597 Cole Blvd., Suite 310, Golden, CO 80401
Emergency Phone 303-233-8383, Fax 303-3233-8282
Product Identification: Grasspave²
Product Description: Solid plastic resin molded into ring and grid structure, sold in nine roll sizes for easy installation.

Product Materials: HDPE (high density polyethylene) plastic resin, primarily from post-consumer and post-industrial recycled sources. May contain small percentages of other resins such as polypropylene, low density PE, or polyester.

Health Hazard: Not Hazardous - per OSHA HCS 29-CFR-1910.1200.

Fire Hazard: Treat as solid, which will burn. Dense smoke emitted when burned without sufficient oxygen, which may emit carbon dioxide or other organics. Wear positive pressure, SCBA in any closed space.

Extinguish Media - Water fog, foam, alcohol foam, CO², dry chemical.

Flash point & Flammable Limits - Not Applicable.

Spills or Leaks: Not Applicable.

Storage Instructions: Plastic materials used have been modified with Ultraviolet light inhibitors to resist degradation. Normal storage outdoors for periods of up to 4 weeks should not cause any damage to the product. If longer storage is required, cover the product with a tarp, which will protect the product from sunlight.

Waste Disposal: Recycling of this material is encouraged. Landfill disposal of waste product may be made in accordance with local government regulations. This product should be considered non-biodegradable.

Disclaimer: The information contained herein is believed to be accurate. However, it is provided solely for customer consideration, investigation and verification. Invisible Structures, Inc. hereby specifically disclaims any and all warranties - expressed or implied, regarding the accuracy and completeness of such information, and makes no representation with respect thereto.