Invisible Structures Sustainable building and site development Green buiiding and sustainable design
Portable ADA Boardwalk System Drainage/Conveyance Layer Grass Porous/Permeable/Pervious Paver Gravel Porous/Permeable/Pervious Paving Subsurface Stormwater Storage Permanent Erosion Control
Design Detail/Technical Specifications Greenbuilding LEED Points Total Stormwater Management Sales and Support Frequently Asked Questions Project Profiles/Case Studies About Invisible Structure Inc.
Tech Specs
Best Shipping Heights
Brochure
Installation Estimatator
Video
Design Details
RS3 White Papers
Project Profiles
FAQs

Design Details
All files are either Zipped AutoCAD dwg or pdf

DWG
PDF


All Rainstore3 Details Download all Rainstore3 dwg files, (2.5 MB) -zipped or all Rainstore3 pdf files (2.6 MB) zipped.

Rainstore3 Unit Detail
This detail shows a single injection molded piece of Rainstore3 - its geometry and dimensions.

Typical Rainstore3 Detention or Retention System Below Paving Detail
Use this detail to help design a versatile underground stormwater storage system. Flexibility in your design, can be achieved by varying the depth of the units, the length, and the width. This detail shows a detention/retention system under pavement.

Rainstore3 System for Harvesting and Reuse of Water
If you are designing a system to recapture roof-runoff, stormwater runoff, irrigation runoff or more, Rainstore3 subsurface storage chambers are ideal. This detail shows how to make a long term water storage system for gray water irrigation or fire protection.
Rainstore3 with Porous Paving Inflow Method
You can design in a thorough prefiltration system without having to use structural inlets or costly prefiltration systems. Use this detail to design an environmentally friendly Porous Paving (Grasspave2 or Gravelpave2) surface inflitrating into a Rainstore3 chamber. This method will reduce your overall system and component costs (versus traditional stormwater systems).

Sand Bio-filter Method Leading to a Rainstore3 Chamber
Choose this detail to design a non-structural, thorough filtration system with aggregate or vegetated surfacing. The combination of Rainstore3, Draincore2, and Grasspave2 or Gravelpave2 can reduce your costs significantly compared to traditional stormwater management systems. Runoff from a hard surface can be directed to the permeable surface (GP2 or GV2), cleaned via the sand bio-filter, and conveyed to the Rainstore3 storage chamber via Draincore2.

Rainstore3 Inlet and Outlet Pipe Detail
With this detail you can design the connecting intlet and outlet pipes to the Rainstore3 stormwater chamber.

Rainstore3 Maintenance and Access Port Detail
Choose this detail to design maintenance and access ports into your Rainstore3 system. In most cases, you will need to access the subsurface chamber, from time to time.

Beachrings2 | Draincore2 | Grasspave2 | Gravelpave2 | Rainstore3 | Slopetame2 | GreenBuilding1 | Total Stormwater Management
Home | Project Profiles | Sales and Support | About Us | FAQs | Downloads | Site Map