303-233-8383 [email protected]

Project Profile:

Gulf Breeze Private Residence

Project Summary

Besides having a small access drive to the beach near the front entrance security gate and the golf putting green, there is a unique application of Grasspave2. The rings and grid are used to stabilize juniper vegetation on the back side of a rock and sand beach wall. This location has been hit with some serious waves and the intent was to prevent shoreline erosion by introducing dense vegetation. In some of the photographs you will be able to see the edge of Grasspave2 mats where vegetation is slowly growing over and entwining with the plastic structure. A section of the wall was under construction modification to create a new seating area.

Address

N.A.

Install Size

180 m2 (1938 sq ft)

Designer

N.A.

Contractor

N.A.

Project Gallery

A Pensacola, Florida, private residence installed Grasspave2 filled with juniper rather than grass to protect their beach wall.
Ocean view of private dock with juniper covered Grasspave2 raised wall.
Grasspave2 Mats were installed to stabilize the beach wall of a beachfront home which used juniper bushes rather than grass.
Oceanside view of rock wall as photographed from the private dock.
Grasspave2 Mats were installed to stabilize the beach wall of a beachfront home using juniper bushes.
Close-up of rock wall showing an edge of Grasspave2, far right, where vegetation has not completely finished covering.
Grasspave2 was installed to stabilize the beach wall of a beachfront home using juniper bushes.
Dense vegetation is evident here on the estate side of the wall, at the bottom of the stairs.
Grasspave2 mats were installed to stabilize and protect a beachfront home.
Area where protected seating area is being modified into the beach wall
Juniper bushes were used rather than grass in this Grasspave2 installation to prevent erosion of the beach wall.
Vegetated view of Photo #1 area. The plant material is very dense and well rooted.