303-233-8383 [email protected]

Project Profile:

Stor-Mor Systems, Inc.

Project Summary

This is a project that the client installed themselves with the supervision of our representative Larry Spath. Rainstore3 saved them a lot of land area which didn't have to be dedicated to a detention basin because they were able to put the product underground and have a parking lot and display area above. The site drain very well even in heavy storms.

Address

1301 N Teare Way, Meridian, ID  83642

Install Size

1026 units

Designer

Stor-Mor Systems, Inc., client installed Rainstore3 themselves.

Contractor

Stor-Mor Systems, Inc., client installed Rainstore3 themselves.

Project Gallery

Stormwater Storage was achieved at Stor-Mor Systems in Meridian, Idaho, using Rainstore3.
Stor-Mor Sheds wall display gives you an idea of the type of quality sheds they build for satisfied customers.
Underground-Water-Retention was achieved at Stor-Mor Systems in Meridian, Idaho, using Rainstore3.
The SW corner of their property is where the Rainstore3 detention basin is located underneath the paving shown here. There is an inlet in the shadow in the foreground.
A Subsurface Cistern was installed at Stor-Mor Systems in Meridian, Idaho, using Rainstore3.
Here is a closeup photo of the inlet shown in the previous photo. Stormwater from this entire parking lot drains into one of these.
A Stormwater-Detention System was installed at Stor-Mor Systems in Meridian, Idaho, using Rainstore3.
This photo and the next one will give you an idea of the parking lot area that drains stormwater into the Rainstore3 system.
Rainwater Storage was achieved at Stor-Mor Systems in Meridian, Idaho, using Rainstore3.
There is another inlet back near the open walled warehouse that also drains into the Rainstore3 system centered under the pavement where the truck is located.
Underground Water Storage was achieved at Stor-Mor Systems in Meridian, Idaho, using Rainstore3.
A closeup shot shows the printing on the inlet cover that reads "dump no pollutants".